ZERONE Lightened Aluminium Crank Pulley

Tap into hidden horsepower with the ZERONE Lightened Aluminium Crank Pulley. It underdrives your accessories by 23%. This, in turn, decreases the drag on the engine, unleashing power that you never knew you had. And since it is lighter than OEM crank pulley, your engine will benefit from the weight reduction of rotating mass; resulting in a more responsive engine. Each pound of weight removed from the crankshaft is worth approximately 2.7HP and gains even more with forced induction, nitrous and VTEC.

ZERONE Lightened Aluminium Crank Pulley is made of T6 6061 aluminium and comes in gold anodized finish.

Available for the car models below:-

HONDA
Honda City / Jazz
Honda Civic - DOHC VTEC (B series)
Honda Civic EK 1.6 (SOHC)
Honda Civic ES 1.7
Honda Civic FD 1.8
Honda Civic FD 2.0
Honda Accord H22A

MITSUBISHI
Mitsubishi (4G91 / 92 / 93)
Mitsubishi VR4 / EVO 1-3 (4G63T)
Mitsubishi EVO 4-8 / Airtrek
Mitsubishi Lancer GT
PERODUA
Perodua Kancil L2
Perodua Kelisa / Kenari
Perodua Myvi (K3-VE)

PROTON
Proton Saga / Iswara / Wira / Satria (4G13 / 15)
Proton Wira / Satria (4G13 / 15 - SVDO)
Proton Wira / Satria / Putra (4G92 / 93)
Proton Waja SOHC (4G18)
Proton Perdana V6 (6A12)
Proton Gen.2 / Persona / Saga BLM / Satria Neo / Waja (CAMPRO)

TOYOTA
Toyota Altis / Wish
Toyota Avanza (K3-VE)
Toyota Levin 16V / 20V (4A-GE)
Toyota Levin 16V (4A-GZE)
Toyota Vios 03/07 (1NZ-FE)
SUZUKI
Suzuki Swift 1.5
NISSAN
Nissan Latio / Grand Livina
Nissan Sentra N16

Price: Inbox me your vehicle for price

toptuned@hotmail.com
www.toptuned.blogspot.com

Intake Supercharger

• Superchargers achieve performance gains by increasing the density of the air/fuel charge within the combustion chambers of an engine
• This increase in density is achieved by forcing additional amounts of air (beyond the amount of air that normal atmospheric pressure would force into the engine) at the lowest temperature possible.
• CFM measures the volume of air that an engine is flowing, while MAF (mass air flow) also factors in the temperature of the air charge, since a cooler charge is more dense and therefore more powerful.
• In technical terms, supercharging increases both the volumetric efficiency of the engine and the mass air flow through the engine to produce gains in both horsepower and torque.

Price: $170

toptuned@hotmail.com
www.toptuned.blogspot.com

NGK BKR5EYA-11 V-Power Spark Plugs, Set of 4

•     OEM/Standard:  GOOD, meets OEM specifications

•     V-Power: BETTER, improved ignitability, fuel economy and emissions
•     G-Power:  BETTER, improved ignitability, fuel economy and emissions, platinum alloy for durability
•     Iridium IX: BEST, superior ignitability, fuel economy and emissions
•     Laser Platinum: BEST, laser precision for superior ignitability, fuel economy and emissions, platinum alloy for durability
•     Laser Iridium: BEST, laser precision for superior ignitability, fuel economy and emissions, iridium alloy for highest durability

Price: Inbox for your vehicle and price

toptuned@hotmail.com
www.toptuned.blogspot.com

Service Manual

Price: $50

toptuned@hotmail.com
www.toptuned.blogspot.com

PIVOT 3-DRIVE THROTTLE CONTROLLER

    • Compact ultra-thin controller for a clean sleek look

   •  New 14mm FLAT model can be installed just about anywhere without interfering with the your interior design

    • 3-DRIVE is a device designed for electronic throttle car models that gives you, the driver, the freedom to select the type of acceleration response you need or desire. A wide variety of response adjustment can be yours: from Sports Mode which gives you a keenly sharp response for speedy driving to a slower than normal response to enable eco-driving even without thinking about it. 3-DRIVE is a next generation throttle controller for both Sports and Eco-driving

Price: Inbox me your vehicle for price

toptuned@hotmail.com
www.toptuned.blogspot.com

OBX WS Universal Muffler (U.S)

• SUS-304 Stainless Steel Wool Double Wrapped
• Increase horsepower
• High quality T-304 full stainless steel
• Brand New Sealed In Box

Price: $350

toptuned@hotmail.com
www.toptuned.blogspot.com

Pivot Mega Raizin Volt Stabilizer & Regulator

• 100% Authentic with clear '15' marking on fuse and 'K' marking on condenser 
• Will display real time voltage and battery lowest voltage at engine start 
• Power cable from the Pivot Raizin is blue in colour
• Brand new in original manufacturer box 
• Come with free 5 point Pivot Super Earth grounding cable
• Universal fitting for all 12v vehicle

Bruneian Review: http://toptuned.blogspot.com/2010/12/fuel-economy-test-drive.html

Price: $150

toptuned@hotmail.com
www.toptuned.blogspot.com

3" Intake Pipe Proton Satria Wira Persona coupe m21

Aluminium Polished 3 Inch Air Intake Pipe for Proton Mitsubishi Satria, Wira, Persona, Jumbuck, Agogo, Coupe, Sedan, Gti, m21, Putra, Mitsubishi Colt 1.3, 1.5, 1.6, 1.8 fuel injection engines.

- BRAND NEW 3 inch intake pipe made from lightweight aluminum cylinder. Overall length is approximately 14 inch or 36cm. About 120 degree bend.
- Polished finish, an excellent decoration to give your car a racing look.
- Easy to install. Universal fit, fit direct to throttle body or factory pipe, suits most car models, slight modification might be necessary depending on car model.
- Comes with 4 metal fixtures/connectors, 1 breather hose, one 3 inch to 2.5 inch reducer hose. Pipe has a hole for air flow sensor. You’ll get the exact items as seen in picture.

Price: $180

toptuned@hotmail.com
www.toptuned.blogspot.com

K&N 57i Air Intake 00 01 02 03 Proton Satria

• Street legal in most states
• Designed to increase HP and Acceleration
• Engineered to Specific Vehicle Design
• Easy to Install, Usually in 90 minutes or less!
• Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
• Million Mile Limited Warranty
• Replaces OEM Filter and Air Box
• Air Filter is Washable and Reusable
• Works with Original Equipment Manufacturer Computer Systems

Part No: 5675564

Fitment:
• 2000 Proton Satria 1.8L L4 F/I
• 2001 Proton Satria 1.8L L4 F/I
• 2002 Proton Satria 1.8L L4 F/I
• 2003 Proton Satria 1.8L L4 F/I

Price: $395

toptuned@hotmail.com
www.toptuned.blogspot.com

Turbo Boost Air Intake Electric Supercharger+3" Filter

This will increase you airflow which in return gives you more power. Turbo runs off 12V so you can wire it directly to your battery. Also this turbo only draws 3 ams so you dont have to worry about any power loss or dimming lights!! Wire this turbo up so you can flip a switch for an extra boost when you need more power or just run it all the time for all around better gas mileage. This turbo can work with all your factory intake parts no expensive intercoolers or blow off valve are needed. This turbo can also work with cold air intake. The turbo come with an adapter for easy to install.

• 100% New in Box & Good Quality
• Increase In Horse Power
• Increased Torque
• Forces Air Into the Intake System By Using An Electric Generator
• Dramatically Increased Acceleration
• 3" Inlet & Outlet
• Come With One 3" Air Filter
• Excalty As The Picture
• Installation Instruction Are Not Provided
• Professional Installation Recommended

From: United States

Price: $220

toptuned@hotmail.com
www.toptuned.blogspot.com

Proton Seat Cover / Jumbuck Satria Gti Gen 2 Savvy

* This listing is for one black, durable, water resistant Seat Cover for any Proton

* Featuring the Proton logo

* Very useful item to protect against dirt, oil, water etc / Makes a great gift!

* Covers the whole Seat as pictured

Price: $120 (pair)

toptuned@hotmail.com
www.toptuned.blogspot.com

Rx Racing “Street Demon” Series 485HP Package For Proton Gen2 (T3T4 TurboCharger Turbo Kit)

(1) Hybrid Turbo Charger (INTERNAL WASTEGATE):

• .57 compressor wheel trim mapped for low and high boost setups
• Oil fitting gaskets & mounting studs included
• Capable of producing over 450 horsepower
• Wet float bearings & properly balanced
• 3" inlet diameter with a 2" outlet
• 50 A/R compressor housing
• Internal wastegate setup
• .63 A/R turbine housing
• 1/8 NPT oil inlet
• T3/T4 hybrid

(1) Front Mount Intercooler:

• Large design cools down the turbocharged air efficiently
• Strong TIG welds will support high PSI levels
• Lightweight aluminum racing intercooler
• Extra thick core provides ample cooling
• 2.5" cold outlet & 2.5" hot inlet
• Less than 2% pressure drop

(1) Universal Intercooler Piping Kit:

• Lightweight yet strong aluminum piping
• May necessitate light modification to fit
• (16) stainless steel worm gear clamps
• (2) 2.5” 90 degree silicone couplers
• (6) 2.5” straight silicone couplers
• (2) 90 degree 2.5” bends
• (2) 60 degree 2.5” bends
• (2) 45 degree 2.5” bends
• (2) straight 2.5” pipes

(1) Boost Controller:

• Can be setup to adjust boost PSI on the fly
• Can be adjusted for any PSI level desired
• Control your boost with a precise click
• Includes complete install kit
• Anodized aluminum finish
• CNC machined design

(1) Slim Cooling Fan:

• Fan can be used to cool: A/C condenser, oil or transmission cooler, mounting on an intercooler to prevent heat soak, or cooling a a2w radiator
• Slim design provides excellent engine bay clearance
• Includes the mounting tabs for a easy zip tie install
• Reversible design can either pull or push air
• Versatility of a push/pull reversible fan
• Superior flow of a curved-blade design
• Creates additional aftermarket cooling
• 1.25" thick outside perimeter
• 2.50" thick inside perimeter

(1) Electronic Turbo Timer:

• Ensures a proper cool down for your turbocharged car every time
• Includes pigtail wiring and extra wiring for ease of installation
• Important to preventing premature turbo wear and failure
• Mounted inside the vehicle for on the fly adjustments
• Precisely calculates the cool down period for the motor
• Auto mode feature creates a hassle-free operation
• Increases turbocharger's operating lifespan
• Bright Easy to read LED Digital Display
• Failure to reduce the temperature of the turbo could result in "coking" of oil inside the turbo
• Coking is the baking of oil, turning it into a grimy substance

(1) 10 Meters Heat Wrap:

• Heat powers the turbochargers turbine inlet. Keep the heat inside the exhaust pipes
• Heat kills the turbochargers compressor inlet. Keep the heat out of the cold piping.
• Control additional engine bay heat and prevent overheating.
• Keep intercooled air cooled.
• Made of very high temp fiberglass.

(1) Vband and Clamp:

• 2.5" Inlet
• Direct fit to turbocharger.
• Allows for existing exhaust to easily connect

(1) High Flow Intake Filter:

• Protect the turbo system from debris
• Instant HP adder
• Extreme high flow
• 3" inlet perfectly matching the turbocharger inlet

(1) High Flow Breather Cap:

• Extreme high flow
• Keeps crankcase ventilation clean for emissions
• Works in conjunction with the catch can to keep inside of turbo piping oil free

(1) Coolant Sensor Bung

• Monitor the water temperature via this sensor relocation
• Easy solution to run aftermarket coolant sensor
• Provides more precise readings then the stock location
• Features 2 installation clamps for an easy add on
• 38mm ends fits most OEM coolant hoses
• Strong Aluminum construction

(1) Non-divided T3 Flange

• Water jet cut for precision flow
• Mild steel for easy welding to an adapter pipe or direct to stock manifold

Other cars also available, please inbox your vehicle for price.

Price: $1800

toptuned@hotmail.com
www.toptuned.blogspot.com